 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Parts Index |
Sohc Honda CB Motorcycles |
|||||||||||||
| Remove the screws holding the bell housing and pull it out. Then the two others (opposite) holding the drive housing. Note: you now have full access to the indicator shaft spring for possible adjustment. I tried this with less than good results, so I don't recommend it. | ||||||||||||||
 |
 |
|||||||||||||
|
The next six photos show lubrication points.
Use lithium grease (White Lube). Don't use an excessive amount.
Just a little, contaminating the magnets under the bell housing will result
in erratic movement of the speed indicator.
Warning: Do not get grease on the magnets circled in red; the lubrication points are circled in blue !! |
||||||||||||||
 |
 |
|||||||||||||
| Previous - Next Page 1 - 2 - 3 - 4 - 5 | ||||||||||||||
