| Parts Index |
Sohc Honda CB Motorcycles Disassemble the Speedometer of your Sohc CB750 the easy way, without cutting or sawing any part. |
|||||||||||||||||||
|
Thanks and Acknowledgement to Steve Swan !! |
||||||||||||||||||||
![]() |
||||||||||||||||||||
| Start by prying open the retaining ring with a utility knife, from the bottom side. Pry the ring up just enough to fit in a small common screwdriver. Be careful with the utility knife..they're very sharp. | ||||||||||||||||||||
![]() |
||||||||||||||||||||
| Pry the retaining ring upward as you work your way around, opening only about a 1/16th inch gap. Don't twist the screwdriver, it'll just make a mess of the ring. Only push the handle downward, prying upward a very small section (1/4 to 3/8s inch at a time) of the ring. It does take a while to get all the way around, so be patient. | ||||||||||||||||||||
![]() |
||||||||||||||||||||
![]() |
||||||||||||||||||||
|
Remove the screws in the back. |
||||||||||||||||||||
| Next Page 1 - 2 - 3 - 4 - 5 | ||||||||||||||||||||