 |
|
|
|
|
|
|
|
|
||||||||||||||
| Sohc CB750 clutch removal and installation |
CB750 clutch, CB750 clutch removal installation, sohc CB750, CB750K clutch, CB750F clutch, Honda clutch installation Sohc Honda CB Motorcycles |
|||||||||||||||||||||
 |
Tools Required 10&12mm socket/sm. extension, 2) 12mm combo wrench (or 1 w/medium crescent), pliers (needle-nose), hand impactor and phillips driver. |
|||||||||||||||||||||
 |
||||||||||||||||||||||
|
My living room. |
||||||||||||||||||||||
|
Remove kick starter with 12mm socket. |
||||||||||||||||||||||
| Pull back boot and undo lock nut at clutch cable end (this requires 2 wrenches), then turn slack adjuster all the way in. Next, remove cable head at lever. | ||||||||||||||||||||||
 |
 |
|||||||||||||||||||||
 |
 |
|||||||||||||||||||||
| Remove outer clutch cover with phillips head screwdriver and pull clutch cable end out of holder. This is why you need the slack in the cable at both ends. | ||||||||||||||||||||||
|
Back to Tech INDEX |
||||||||||||||||||||||
| Next Pg or 1 2 3 4 5 6 7 | ||||||||||||||||||||||
| Sohc CB750 clutch, CB750 clutch removal installation, sohc CB750, CB750K clutch, CB750F clutch, Honda clutch installation | ||||||||||||||||||||||
