First loosen the (mine are red) intake retaining band...REAL loose, enough so they move easily.

 

Grab the carbs on each side, and while pulling, pivot them up and down.  If it's the first time they've been off for a long time, this may be very difficult, but keep trying.  If there is just no way to get them off this way, pack a lot of old rags or clothe...something below them to prevent damage, and get a 4ft. 1x2 and use it as a lever running from one side of the engine, out the other side.  Be sure and pad the 1x2 where is comes in contact with the cylinders' cooling fins...and BE CAREFUL.  You can damage the fins.

Previous - Next  (Page)